Clear Com LQ-R4WG8

Contact the Equipment Rental and Sales team

No data was found

Next up

Clear Com LQ-R4WG8


Linking 4-wire with GPIO audio

The general purpose of the Clear-Com LQ interfaces is to connect and route signals from multiple intercom systems and audio devices from point-to-point or point-to-multi-point, virtually anywhere over the secure IP network. The LQ-4WG2 can interconnect with devices, such as analog ports of any matrix intercom systems, analog telephone circuits, two-way radio gateways and audio consoles.

Clear Com LQ-R4WG8



Resolution: 12, 24 bit
Sample Rate: 24, 48 KHz
Frequency Response: 100 – 12 KHz or 100 – 20 KHz

Line Level: (0 dB)
Input Gain: -12dB to +12dB
Output Gain: -12dB to +12dB
Mic Level: (-50 dB)
Input Gain: -12dB to +12dB
Output Gain: -12dB to +12dB

Network Setting

Bit Rates: 16, 32, 48, 64, 128Kbps
Packet Size: 5, 10, 20, 40, 60ms
Jitter Buffers: 0 – 1000ms


Network/LAN: EtherCON/RJ45 (female)
4-wire with GPIO Audio I/O: 9-way D-type (male)

Partyline Output Current

Type: Clear-Com & RTS TW
Local DC Powered: 250mA per pair of partyline ports (500mA total)

Power Supply

In-line supply with sleeve locking connector
Input: 100-240V, 50-60Hz, 1.4A MAX
Output: DC 12V, 5A, 60W MAX


Operating Temperature: +32°F – +104°F (0°C – +40°C)
Storage Temperature: -67°F – +158°F (-55°C – +70°C)
Humidity: 90%, non-condensing


19 x 1.79 x 8.8 in (WxHxD)
(483 x 46 x 224 mm)


4.29lbs (1.95kg)