- Used Equipment Sales
Imagine OP+HMX+AI+13T
POA
- Description
- Features
- Specification
The OP+HMX+AI 3G/HD/SD audio embedder for the 6800+ module core processing platform has up to eight AES and eight analog audio inputs with optical transmitter.
This module allows for control over the picture, has an embedded audio processor for hot-switching embedded audio, provides full audio delay and processing, and has the ability to embed metadata from external sources. The OP+HMX+AI can be used in any broadcast facility where the embedding of AES or analog signals on SD or HD signals is required, or where the processing of SD or HD video and audio signals is essential.
- Inputs:
- One video serial digital input
- Eight AES inputs (unbalanced, balanced compatible with external baluns)
- Four AES inputs standard, eight AES with HMX68OPT-AES8 license option
- Eight discrete Analog Audio inputs
- DARS Input (unbalanced, balanced compatible with external baluns)
- RS232/422 serial port for external metadata source
- Outputs:
- Four serial video digital outputs
- Fiber transmitter)
- Operational video standards:
- 525 and 625 (SMPTE 259M)
- 1080i/p
- 720p (SMPTE 274M/296M)
- Auto-detect or user-forced input video standard
- 10-bit video processing
- Digital equalization (supports Belden 8281/1694A and newer, thin coaxial cables like Alcatel SD02)
- Passes all HANC samples
- Passes VANC with user-selectable option for VBI/ANC line-by-line video deleting
- Up to eight frames of HD and 50 frames of SD video delay
- Loss of video modes:
- Pass
- Black
- Freeze
- Video processing amplifier with controls for:
- Luminance gain
- Luminance offset
- Chrominance gain
- Chrominance offset
- White clip
- Black clip
- Hue adjustment
- Ability to embed AES on output (fiber or SDI) without video source or genlock
- Ability to embed external metadata
- Dolby® header adjustment
- Basic audio limiting capability:
- User-selectable threshold for soft compression limiting
- Adjustable compression slope
- Adjustable attack time/rate
- Adjustable delay time/rate
- Noise gate level and time
- Module will directly support eight AES unbalanced inputs only; balanced AES supported via external baluns adapters
- Video and audio test generator
- AES/Analog audio routing/advanced processing
- Internal audio processing amplifier with gain, swap, invert, delay, mix (sum) of de-embedded and external audio channels
- Bypassable sample rate conversion for external and embedded audio
- Data mode for passing compressed audio - apt-X®, DOLBY® E, AC-3
- 16-, 20- or 24-bit audio processing
- C, U and V bit transparency
- Shadowed/restored parameter settings when switching video standards
- Card-edge control
- Ethernet remote control and monitoring
- V-fade of the output audio on audio source change
| SERIAL VIDEO INPUT | |
|---|---|
| Number | 1 |
| Standards | 1080p (SMPTE 424M): 3 Gb/s HD 1080i/p (SMPTE 274M); 720p (SMPTE 296M) — HD-SDI SMPTE 259M-C, 270 Mb/s, 525/625 component – SD-SDI |
| Connector | BNC per IEC 169-8 |
| Impedance | 75 ohms |
| Frame Rate | 1080i/p: 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 Hz (3 Gb/s rates are future software upgradeable) 720p: 50, 59.94, 60 Hz |
| Return Loss | >15 dB from 5 to 1485 MHz; >12 dB from 1485 to 2970 MHz |
| Equalization | 3 Gb/s-adaptive cable equalization for up to 164 ft (50 m), typical of Belden 1694A coaxial cable HD-adaptive cable equalization for up to 492 ft (150 m), typical of Belden 1694A coaxial cable SD-adaptive cable equalization for up to 984 ft (300 m), typical of Belden 8281 coaxial cable |
| SERIAL VIDEO OUTPUT | |
|---|---|
| Number | 4 |
| Standards | 1080p (SMPTE 424M) — 3 Gb/s HD 1080i/p (SMPTE 274M); 720p (SMPTE 296M) — HD-SDI SMPTE 259M-C, 270 Mb/s, 525/625 component —SD-SDI |
| Frame Rate | 1080i: 25, 29.97, 30, 59.94 Hz 1080p: 23.98 (p/psf), 24 (p/psf), 25, 29.97, 30, 50, 59.94, 60 Hz (3 Gb/s rates are software upgradeable) 720p: 50, 59.94, 60 Hz 525, 625 |
| Connector | BNC per IEC 169-8 |
| Impedance | 75 ohms |
| Return Loss | >15 dB from 5 to 1485 MHz; >12 dB from 1485 to 2970 MHz |
| D.C. Offset | 0 V ±0.5 V |
| Signal Level | 800 mV 10% |
| Rise and Fall Time | <135 ps - 3 Gb/s <270 ps - HD-SDI 0.4 to 1.5 ns - SD-SDI |
| Overshoot/Undershoot | <10% |
| Jitter | 3 Gb/s: <2 UI pk-pk of timing jitter (>10 Hz); <0.3 UI pk-pk of alignment jitter (>100 kHz) HD: <1 UI pk-pk of timing jitter (>10 Hz); <0.2 UI pk-pk of alignment jitter for (>100 kHz) SD: <0.2 UI pk-pk (>10 Hz); |
| Delay | Up to 8 frames less 2 lines for 3G/HD; 50 frames for SD |
| UNBALANCED AES/DARS INPUT | |
|---|---|
| Connector | BNC (IEC 169-8) |
| Impedance | 75 ohms |
| Return Loss | >25 dB, 0.1 to 6.0 MHz |
| Sensitivity | <100 mV |
| Input Audio Rate | 32 to 108 kHz |
| BALANCED AES/DARS INPUT (WITH EXTERNAL BALUNS) | |
|---|---|
| Connector | XLR with external baluns |
| Sensitivity | <200 mV |
| Impedance | 110 ohms ±20% (0.1 to 6 MHz) |
| Maximum Input Signal | 10 V (pk-pk) |
| Common Mode Rejection | 0 to 7 V 0 to 20 kHz |
| Input Audio Rate | 32 to 108 kHz |
| ANALOG AUDIO INPUT | |
|---|---|
| Number of Inputs | 8 mono channels |
| Connector | Weidmuller 24-pin locking header-socket pair |
| Input Audio Level | 28 dBu to 12 dBu (adjustable in 1 dB increments) |
| Input Impedance | High-Impedance or 600 ohms, jumper selectable |
| CMRR | >80 dB at 60 Hz, typical |
| Linearity | <±0.5 dB (to -100 dBFS) |
| Frequency Response | <±0.05 dB (20 Hz to 20 kHz), typical |
| THD | >100 dB (at -1 dBFS, 20 Hz to 20 kHz), typical |
| SNR | >100 dB |
| FIBER OPTIC OUTPUT (TRANSMITTER) | |
|---|---|
| Number of Inputs | 1 |
| Wavelengths (nm) | 1310 FP |
| Connector | SC/PC per IEC 61754-4-1 |
| Output Power | -7 dBm ±1 dBm FP |
| Extinction Ratio | 8 dB, typical |
| RS-232/RS-422 (METADATA I/O) | |
|---|---|
| Standard | Electrical specification EIA-232C |
| Connector | DB-9 232/422 switchable |
| POWER AND TEMPERATURE | |
|---|---|
| Power Consumption | 12 W maximum |
| Operating Temperature | 41° to 113° F (5° to 45° C) |
